O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

Product Details
Customization: Available
Operating Temperature: 65 to 75ºC
Thickness: 2.4/2.8/3.2mm
Still deciding? Get samples of US$ 22.33/Piece
Request Sample
Manufacturer/Factory & Trading Company
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
20
Year of Establishment
2015-03-10
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
  • O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
Find Similar Products
  • Overview
  • Product Description
  • Why choose us?
Overview

Basic Info.

Model NO.
Y-AJ08
Feature
Easy Application, Remouldable, Odorless
Transport Package
Cartons
Specification
550*330*3.2
Trademark
Yabin
Origin
China
HS Code
9022909090
Production Capacity
1000/ Week

Product Description

Product Description

 

O Type 4 clamps Thermoplastic Sheet Neck shoulder Radiotherapy Immobilization Cast with smooth edges

O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

 

O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

 

 

 

 

O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

 

  

   

 

O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO QualifiedO Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified


Clients feeback:
O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified
O Type 4-Point Thermoplastic Radiotherapy Head Neck Shoulder Immobilization Mask for Patient Positioning with CE FDA ISO Qualified

 

Why choose us?

Light weight, easy to carry

The weight is light, only 1/8 of plaster, wearing comfortable and neat appearance

Strong Plasticity

Easily shaped by patients' affected positions. Will not rebound after cooling

100% of the memory function

If it can't fit to the patients well, put it back into the hot water and reshaped. It will be quickly recovered to original and can reuse about 6-8 times and realize cost saving.

Good breath ability.

The holes on the materials surface can keep good transmittance, avoid necrosis of the affected infection.

Practical

It has the features of toxic-free tasteless, easy cleaning in cold water after shaped, can wear it during bath, can be penetrated by X-ray, no need to take off when do the X-ray

Eco-friendly

After 1 year, it can be degraded by itself in natural conditions, no pollution to environment .

Good tensile It has good tensile, can stretch in all direction with 1-1.5 times
 



How to use?

1. Adjust the water temperature to 65ºC-75 ºC , more than 80 ºC will make the mask contraction and deformation.

2. Be sure not to place the mask in hot water for a long time. In general, 2-3 minutes should be enough to make the mask soften and activation.

3. The available time for modeling the mask is 3 '30 ''(3 minutes and 30 seconds)

4. The maximum tensile strength of orthopedic sheet is 1.5 times of its original size; And the maximum tensile strength of the mask product is 6 times of its own. Excessive pulling could affect its reshaped resilience and damage its memory function.

5. How to restore a molding mask back to its factory settings? Just put it into the 68ºC-72ºC water and then it will rebound automatically after 5 minutes.

6. Due to the characteristics of the material itself, in the activation process, it will occasionally occur small area of sticky. Please be sure not to pull randomly. When it leaves the water to solidify, it will automatically relieves adhesion.

FAQ:
1 Q: Are you a factory or trading company?
Answer: We are a real factory. It's easy to be recognized from our website and logo.

2 Q: Can you provide samples for checking before order?

Answer: Yes, we can offer you some free samples for some low-valued sample, you need only to bear the freight cost. For some high-valued sample, we'd like to give you a special discount.

 

3 Q: How do your guarantee the quality of your products?

Answer: We have professional inspectors to analyze chemical composition of the raw materials, and test the finished products strictly according to standard stipulated in the contract. In this process, two ends appearance, being degree, fixed length etc., will be checked one by one. From production, packaging to transport, we strive to ensure that every link is perfect.

 

4 Q: What's your MOQ?

Answer: For our low temperature thermoplastic products, one piece should be available.But adding tax, transfer, custom charges, it's not fair for buyers. So a large quantity will be much suitable for all of us.

 

5 Q: How about the trade terms?

 Answer: EXW, FOB, CFR, CIF will be accepted.

 

6. Q: How about your payment term?

 Answer: Paypal, Western Union, L/C is our regular payment terms.

 

7. Q: What is your delivery time?

  Answer: For stocks, we can send the goods to loading port within 7 days after receiving your deposit. For production period, it usually be about 10days-15days.

 

8. Q: Where did you export?

 Answer: USA, Canada, Japan, Southeast Asia, Eastern Europe, South Africa, South America, etc.

9. Q: Can you supply OEM products under my brand?

Answer: Yes, It's Ok.

 

10. Q: Can I become a exclusive distributor of your products in my area?

Answer: Yes, it is possible.

 

11. Q: When and how could I touch you?

Answer: 7days a week&24 hours. I'm a workaholic,  so you could touch me anytime you like.

 

As Long Time As You Need, As Long Time As I Have!

Touch Me for Free Samples!

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier