Thermoplastic Radiotherapy Mask for Cancer Therapy Radiation Immobilization Patient Positioning System

• Brand Name: Yabin
• Model Number: Y-At06
• Certificate: CE FDA ISO13485
• Place of Origin: Shandong, China (Mainland)
• Feature: No Shrinkage, Non-Sticky, Breathable
• Application: Radiation Oncology
• Model NO.: Y-AT06
• Perforation: 36% 30% or Customized
• Thickness: 2.4/2.8/3.2mm
• Sheet Colour: White / Light Green
• Frame Color: White/Blue
• Transport Package: Carton
• Specification: 485*600
• Trademark: YABIN
• Origin: Shandong
• HS Code: 9022909090
• Production Capacity: 6000 Pieces/Month

Product Description

[Product Name]: Low temperature thermoplastic (LTTP) Radiotherapy mask

[Product Performance Structure]:
This product can be softening and plasticity under the lower temperature and it is a new type of polymers. It character changes according to the temperature. Under the normal room temperature (20 to 30ºC ), the material is solid state, hard texture;  Our product can be put into the hot water (The Temperature about 65-70ºC) about 2-3 minutes, it will be soften, and you can make to any shape. Our product very light, good breath ability, high strength, very good tensile, you can stretch it freely, X-ray permeability very good, no stimulation to the skin, biodegradable.

[Cautions]:

1. When you are heating the material in hot water with about 65-75ºC, the water must below 176ºF(80ºC) be sure to maintain the appropriate time, neither too long nor too short, in general, it is enough to make it soften and activated about 2-3min.
2. After the positioning mask was soften, it could be operated within 2-3 minutes in room temperature surrounding . The surrounding temperature would affect the level of hardening.
3. It is important that the thermoplastic are completely cool before removing it from patient, if remove it when still warm, it will cause additional shrinkage and will be very tight in the patient. A cool, damp towel can help speed the cooling process.
4. Be careful with using.
5. Thermoplastic material with engineered limited shrinkage. Remould a mask when the patient's volume has increased or decreased.

[Operation Instructions]:

1. Select the applicable positioning mask for head, head neck shoulder or body Mask.
2. Put the mask into the water with constant temperature of 149ºF-167ºF/65-75ºC for 2-3 minutes when the mask changed to transparent and soften.  Please take it out and put it on the operation table, dry it with a piece of soft cloth. Put the mask on the suitable fixing part to shape it and fix it on the adapter board.  
3. After 2-4 minutes when the mask is in a certain strength, draw the mark line and take it out for the future use.
 
[Storage Method]: Normal Temperature Storage

[Valid Period]: 36 months

 Why choose us?

Light weight, easy to carry	The weight is light, only 1/8 of plaster, wearing comfortable and neat appearance
Strong Plasticity	Easily shaped by patients' affected positions. Will not rebound after cooling
100% of the memory function	If it can't fit to the patients well, put it back into the hot water and reshaped. It will be quickly recovered to original and can reuse about 6-8 times and realize cost saving.
Good breath ability.	The holes on the materials surface can keep good transmittance, avoid necrosis of the affected infection.
Practical	It has the features of toxic-free tasteless, easy cleaning in cold water after shaped, can wear it during bath, can be penetrated by X-ray, no need to take off when do the X-ray
Eco-friendly	After 1 year, it can be degraded by itself in natural conditions, no pollution to environment .
Good tensile	It has good tensile, can stretch in all direction with 1-1.5 times